产品特点
Product features
实时采样市电数据，自动输出最优电压，可以大量节约电能，节电率高达15%—35%。
主回路采用特制元器件，动态多级平滑调节及稳定三相电压，灯光无闪断，对电网无谐波污染，绿色环保，延长灯具使用寿命。
三相设备每相可独立调节，可操作性强，且保证单相的故障绝不影响其它两相的正常运行。
具有过压、欠压、过流保护及自动报警功能。
任意一相负载电流过流时，系统自动旁路，负载电流恢复正常，系统自动复位。
Sample data of municipal power grid at real times, offer the optimum voltage automatically, and save the power by 15% to 35%.
The main loop employs the especially manufactured component, dynamic multi-level smooth adjustment, and stable three-phase voltage, which are able to offer continuous lighting, eliminate harmonic pollution to power grid, and prolong the service life of lamps.
Each phase of the three-phase equipment can be adjusted independently, and the failure of a phase will not affect the normal operation of the other two.
Possess the functions of overvoltage, under-voltage, and overcurrent protection, and automatic alarming.
When the load of any phase is in the overcurrent state, the system will have an automatic bypass. The load current restores to the normal level, and the system is reset automatically.
具有手动强制旁路功能和故障旁路功能。
利用时钟管理模块， 可控制灯具启动和停止时间，且每个月份的开关机时间可以单独设置。
人机交互方便、安全、智能控制，实时显示各相电压、电流。
具有强大的记忆力功能，在断电后保证系统配置参数不丢失。
具有RS232通讯接口，方便数据设定和传输。
具有故障记录功能，最多可以记录100组故障信息（如：某年、某月、某日、某时、某分+故障编号）
配备路灯监控系统，支持RS485总线通信、电话语音通信、GPRS或GSM无线宽带通讯方式。（可选）
Possess the manual compulsory bypass and failure bypass functions.
With the clock management module, the device can control the starting and stopping times of lamps, and the on-off times in each month can be set up independently.
Intelligent and safe control of man-human interaction, and real-time display of voltage and current of each phase.
The powerful memory function ensures the preservation of system configuration parameters after power cuts.
The RS232 communication interface is convenient for data setup and transmission.
With the failure recording function, the device is able to record 100 groups of failure information at most (for
example: a year, month, day, hour, minute + failure number).
The device is provided with lamp monitor system supporting RS485 bus communications, telephone voice
communications, GPRS or GSM wireless broadband communications (optional).
|
